This is the story of how I made our new headboard out of $7 of plastic sheeting and some pillows.

Now it looks like this 😀 😀 😀

VioletLeBeaux-DIY-Headboard-Tutorial-598_18710

And before it looked like this…

VioletLeBeaux-DIY-Headboard-Tutorial-103_18244

No Home Sweet Home page, I’m really behind on those >_<So my old bed was ok but it really didn’t match the rest of the changes I’d made to the bedroom. Meeeeh.VioletLeBeaux-DIY-Headboard-Tutorial-105_18246

You need:

  • Plastic board, I used 4 sheets
  • Pillow cases/fabric
  • Stuffing/old pillow
  • Buttons
  • Glue gun
We rent so obviously I couldn’t screw anything to the walls nor could I afford a new bed frame so instead I made one that just slotted in.

VioletLeBeaux-DIY-Headboard-Tutorial-309_18421

This is the kind of plastic board I used, it was from Bunnings.

VioletLeBeaux-DIY-Headboard-Tutorial-313_18425

I taped it all together into one big piece.

VioletLeBeaux-DIY-Headboard-Tutorial-314_18426

And cut it down so it was the right width and height to slot in behind the bed.

VioletLeBeaux-DIY-Headboard-Tutorial-316_18428

Then James and I sat down on the bed and traced around ourselves to work out how big I needed to make the curve so we could still lean on it comfortably.

VioletLeBeaux-DIY-Headboard-Tutorial-321_18433

We filled them in to be terrible drawings of ourselves… because we’re awesome.

VioletLeBeaux-DIY-Headboard-Tutorial-325_18437

Then we added in some love messages because we’re smoopy like that. And now when I lean against the headboard I always think about how much I love him!

VioletLeBeaux-DIY-Headboard-Tutorial-326_18438

So classy!

VioletLeBeaux-DIY-Headboard-Tutorial-323_18435

Aaaaaaanyway….

I drew on the design of the headboard making sure to leave room for James’ abs.

VioletLeBeaux-DIY-Headboard-Tutorial-329_18441

And the other side too.

VioletLeBeaux-DIY-Headboard-Tutorial-330_18442

Then I cut it out.

VioletLeBeaux-DIY-Headboard-Tutorial-332_18444

To save time later I drew the placement of where the buttons would eventually go. To make sure they were even I made a grid with a fancy thing called a ruler 😀

VioletLeBeaux-DIY-Headboard-Tutorial-334_18446VioletLeBeaux-DIY-Headboard-Tutorial-333_18445

Then I poked holes through with a pair of scissors.

VioletLeBeaux-DIY-Headboard-Tutorial-336_18448

Now for the design! We managed to get a doona (duvet) cover for $40 on sale at Target and it came with pillow cases. I wanted different pillow cases so I decided to use them on the headboard instead. Luckily the pattern matched up.

VioletLeBeaux-DIY-Headboard-Tutorial-338_18450

I opened them out so there was enough fabric to cover the whole thing. It didn’t reach the bottom but that really didn’t matter because it would be covered up by the actual bed.

VioletLeBeaux-DIY-Headboard-Tutorial-340_18452

Now it was time for the fun part: pillow stuffing.

VioletLeBeaux-DIY-Headboard-Tutorial-344_18456

I emptied an old pillow all over the plastic.

VioletLeBeaux-DIY-Headboard-Tutorial-346_18458

And hot glued it in place. I didn’t have too much stuffing so when I have money for more I’ll be buying some and opening it up and restuffing.

Kinda looks like a big cloud 😀

VioletLeBeaux-DIY-Headboard-Tutorial-347_18459

Once it was fluffy I laid out the fabric and hot glued it along the bottom to the plastic.

VioletLeBeaux-DIY-Headboard-Tutorial-354_18466

I then made sure there were no wrinkles and slowly went around the edge hot gluing it around the back side. It was very important to pull it tight. It was also important not to burn myself. I only managed to do one of those things though.

While gluing the edges I made sure to put stuffing over them too so the fabric didn’t show the sharp edges of the plastic.

VioletLeBeaux-DIY-Headboard-Tutorial-359_18471

Taadaaa…

VioletLeBeaux-DIY-Headboard-Tutorial-360_18472

It started looking more like something useful at this point! And James said he doubted I could make it work!!!

VioletLeBeaux-DIY-Headboard-Tutorial-365_18477

And the back. I reinforced it with some off cuts to make sure it didn’t bend.

VioletLeBeaux-DIY-Headboard-Tutorial-366_18478

Close ups of glue…

VioletLeBeaux-DIY-Headboard-Tutorial-371_18483

And this is it slotted in the bed:

VioletLeBeaux-DIY-Headboard-Tutorial-472_18584

The last step is to add in the buttons. At first I tried to make my own buttons by covering more plastic but that was extremely tedious so instead I got off my butt and bought some nicer ones 😀

VioletLeBeaux-DIY-Headboard-Tutorial-592_18704

To hold them in place at the back I used some cardboard off cuts cut like this. I threaded each button, stitched it through the hole leaving the ends both out the back of the hole then tied them around the piece of cardboard so they were kept in place. Hard to explain but it works. It’s very important to keep the buttons as tight as possible so they make nice dents in the fabric.

VioletLeBeaux-DIY-Headboard-Tutorial-594_18706

Like this:

VioletLeBeaux-DIY-Headboard-Tutorial-595_18707

The buttons pucker the fabric through the padding.

VioletLeBeaux-DIY-Headboard-Tutorial-597_18709

And that’s it!

VioletLeBeaux-DIY-Headboard-Tutorial-602_18714

I am extremely happy with how this turned out. While it’s not the most professional thing in the world it brightens the room up beautifully, matches all my new decorating and it was extremely cheap.

VioletLeBeaux-DIY-Headboard-Tutorial-598_18710

What do you guys think? I think the Home Sweet Home project is starting to come along nicely~

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close